What to do right now
- Find and stop the water. Mold follows moisture; AC leaks, supply lines and window leaks are common culprits.
- Don't disturb it. Scrubbing or sanding dry growth can spread spores. Keep fans from blowing across it.
- Keep people away if anyone has asthma, allergies or a weakened immune system.
- Photograph it with something for scale, and note when the leak happened.
- Check the size. Under about 10 square feet, EPA says many people can clean it themselves; above that, Florida's licensing rules apply to paid work.
Why mold moves fast here
- Humidity. Miami air is often humid, and EPA advises drying wet materials within 24–48 hours to prevent growth.
- Hidden leaks. Slow AC condensate leaks and plumbing drips behind cabinets can run for weeks unseen.
- Closed-up units. Seasonal residents may come back to growth after the AC failed or was set too high.
- Paper-faced drywall and cardboard boxes in closets feed growth quickly.
Florida's mold rules in plain English
- Licences: Florida licenses mold assessors and mold remediators under Chapter 468, Part XVI. The statute defines both trades around mold growth of more than 10 square feet.
- No double-dipping: a mold assessor can't remediate a structure it assessed in the last 12 months, and a remediator can't assess a structure it remediated in the last 12 months. Certified Division I contractors are an exception under the statute.
- No kickbacks: assessors and remediators can't pay each other referral fees, and an assessment can't be priced on its conclusions.
- Look it up: check any licence on the Florida DBPR licensee search at myfloridalicense.com.
The Florida mold license checker walks you through these rules for your situation.
What remediation usually involves
- An assessment by a licensed mold assessor (sampling and a written protocol) when growth is over 10 sq ft or hidden
- Containment with plastic sheeting and negative air pressure (HEPA air scrubbers)
- Removal of moldy porous materials (drywall, insulation, carpet pad)
- HEPA vacuuming and cleaning of the remaining surfaces
- Drying the area and fixing the moisture source
- Post-remediation verification, usually by an independent assessor
Providers commonly follow the IICRC S520 mold remediation standard.
Step by step
- Assessment: a licensed assessor inspects, samples where useful and writes a protocol.
- Containment: the work area is sealed and placed under negative pressure.
- Removal and cleaning: affected materials come out; surfaces are HEPA-vacuumed and cleaned.
- Drying and repair of the source: the leak is fixed and the area dried.
- Clearance: an assessor, not the remediator, checks the result against the protocol.
Mold costs
From /pricing/:
| Job size | Example | Planning range |
|---|---|---|
| Assessment | Inspection and testing | $250–$650 |
| Typical remediation | A wall section or closet after a leak | $1,223–$3,758 |
| Large | Whole-house remediation | $10,000–$30,000 |
National guides put remediation at about $10–$25 per square foot. Water extraction and drying before remediation is priced separately.
Water category and mold risk
| Water source | Category | Mold-risk note |
|---|---|---|
| Clean supply line or AC leak, dried within a day or two | 1 | Low if dried quickly |
| Washer or toilet overflow without waste | 2 | Higher; pad and some materials removed |
| Floodwater, sewage | 3 | Wet porous materials removed; mold plus contamination |
Categories follow IICRC S500.
Mold claim checklist
- The date of the original leak, and when you first saw growth
- Photos with a ruler or tape for scale
- The assessor's report and protocol (licence number on it)
- The remediator's scope, containment photos and invoice (licence number)
- The clearance report
- Your policy's mold sublimit, if any. Many policies cap mold coverage, so ask your insurer.
When to call
Call now if visible growth is bigger than about 10 sq ft, if there's a strong musty odor after a leak, or if it's in an HVAC closet or ducts. It can wait for a small spot on a bathroom ceiling that comes off with normal cleaning and doesn't return. Fix the ventilation.